About Us Development Scientific-researches Technology Certificates Partners Order form Contacts
BIOMASS
MANUFACTURE OF FUEL BRIQUETTES AND PELLETS



TECHNOLOGIES WITH APPLICATION OF SECONDARY MATERIALS
WOOD
MANUFACTURE OF WOOD CHIPBOARDS
MANUFACTURE OF FINISHING SLABS FROM WOODEN MATERIAL
STONES
MANUFACTURE OF FACING SLABS, BRICKS AND TILES
MANUFACTURE OF PARTITION BLOCKS
COAL
MANUFACTURE OF FUEL BRIQUETTES FROM COAL
METALS
MANUFACTURE OF BRIQUETTES FROM SECONDARY METAL REJECTS

MANUFACTURE OF FINISHING SLABS FROM WOODEN MATERIAL

Is offered the development of wood-components’ slabs such as sandwiches containing a combination of wood-chippings’ components and other materials, in particular a combination of wood-chippings' components and wastes of stone working. Wooden components and stone waste are mixed with polymeric material Naralex LA.

The received slabs possess by the following characteristics:

  • Manufacturability to processing
  • Strength
  • Noise and thermal insulations properties
  • moisture and water resistance
  • Small weight
The density of material is 1,04–3,5g/cm3. It is adjusted during forming.

Temperature of forming is equal to 180°C, the pressure is 30 kgf/cm2, holding time is 30 minutes.

Slabs of corresponding configurations are received by a method of forming or processing using existing stone working machine.

The technology is accessible both for large and for small enterprises.

The material may be used in constructions as partition slabs, facing slabs, as the bearing structure elements of buildings and elements of small architecture.

The opportunity of ordering of any products presented on a site and also of consultation, research or lecture will be given. >>more>>>
  • Briquette manufacture machine >>more>>>
  • Pellet manufacture machine >>more>>>
    Porto Sant Elpidio(AP), Via Ancona 25
    tel:
    cell:
    (39) 0734991939
    (39) 3334751759
    (39) 3403792082
    E-mail: surentechnology@libero.it
    This web page has been
    prepared with support
    of SMEDNC.
    Copyright © 2005 www.SURENTECHNOLOGY.com | All rights reserved.